Sikaflex®-15 LM is a low-modulus, high-performance, 1-component, polyurethane-based, non-sag elastomericsealant.

• Low modulus of elasticity

• Easy and ready to use

• Eliminates time, effort, waste, and equipment clean-up

• High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear resistance

TECHNICAL INFORMATION Shore A Hardness ~25 (after 21 days) (ASTM C661) ~25 (after 28 days) (ISO 868) Elongation at Break ~700 % (ASTM D412) Elastic Recovery >80 % Movement Capability +100 / -50 % (ASTM C719) Chemical Resistance Good resistance to water, diluted acids, and diluted alkalines. Not normally designed for fully immersed conditions. Contact Sika Canada Technical Service for specific data. Resistance to Weathering 0 (no cracks) (ASTM C793)

• Stress relaxation

• Very good adhesion – bonds to most construction materials without primer

Usage

Typical applications include:

• Joints in concrete panel and wall systems, around window and door frames, reglets, flashing, common roofing detail applications, etc.

• Moving joints in vertical applications.

• Exterior Insulation Finish Systems (EIFS)

• High-rise and facade applications where high movement capability is required.

• 2- and 3-hour UL Fire Rated Joint System Nos. FF-S-0007, FF-S-0037, FW-S-0015, FW-S-0018, HW-S-0076, HW-S-0095, WW-S-0011 and WW-S-0060

Advantages

• Low modulus of elasticity

• Easy and ready to use

• Eliminates time, effort, waste, and equipment clean-up

• High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear resistance

• Stress relaxation

• Very good adhesion – bonds to most construction materials without primer

• Suitable for use between similar as well as dissimilar materials.

• Very good resistance to weathering

• Proven in tough climates around the world

• Urethane-based, suggested by EPA for radon reduction

• Can be painted

• Jet fuel resistant

• Proven in tough climates around the world

• Non-leaching

• Movement capability of +100 / -50 % (ASTM C719)

Packaging

300 mL (10.1 fl. oz) cartridge - 24/case590 mL (20 fl. oz) sausage - 20/case

Colour

White, Aluminum Grey, Limestone, Black, Dark Bronze, Capitol Tan,

Off-White. Special colours on request (min. volume)

Product Details

Sustainability / Certifications / Approvals

ENVIRONMENTAL INFORMATION

 Contributes towards satisfying LEED®  – EQ/MR Credit: Low-Emitting Materials

APPROVALS / CERTIFICATES

• Meets Federal Specification TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 100/50, use T, NT, G, A, O, M

• Meets Federal Specification for silicones - TT-S-001543 A, Type non-sag

• Tested in accordance with ASTM C1382 for use in EIFS systems

Storage Conditions

Store in dry conditions, protected from direct sunlight and at temperatures between 4 °C and 35 °C (40 °F and 95 °F). Condition material to 18 °C – 24 °C (65 °F – 75 °F) before use.

Ambient Air Temperature

Minimum: 4 °C (40 °F) / Maximum: 38 °C (100 °F)

Note: Sealants should be installed when substrates are at mid-range of their anticipated movement. Temperature must be at least 3 °C (5 °F) above the dew point

Substrate Temperature

Minimum: 4 °C (40 °F) / Maximum: 38 °C (100 °F)

Note: Sealants should be installed when substrates are at mid-range of their anticipated movement.

Curing Time

• Tack-free time: 2 to 6 hours (TT-S-00230C)

• Tack-free (to touch): 3 hours

• Final cure: 7 to 10 days

TECHNICAL INFORMATION :

Shore A Hardness ~25 (after 21 days) (ASTM C661) ~25 (after 28 days) (ISO 868) Elongation at Break ~700 % (ASTM D412) Elastic Recovery >80 % Movement Capability +100 / -50 % (ASTM C719) Chemical Resistance Good resistance to water, diluted acids, and diluted alkalines. Not normally designed for fully immersed conditions. Contact Sika Canada Technical Service for specific data. Resistance to Weathering 0 (no cracks) (ASTM C793)

We are local company in Canada / Vancouver