Technical Data Sheet 3M™ Masking Tape 2307 English-US Last Revision Date: September, 2024 Supersedes: June, 2024 Product Details Regulatory Info/SDS Product Description 3M™ Masking Tape 2307 is a general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure sensitive tape is needed. Product Features • Tape has been tested and found to meet the requirements of ASTM D 6123 / D 6123M-97. 3M does not test each lot for compliance to this specification. • Rubber adhesive for instant adhesion that sticks easily and helps reduce labor. • Good holding power to help resist lifting or curling. • Crepe paper backing that is conformable to maintain integrity when formed around a corner. • Easy tear and sliver resistant • Good paint hold-out that resists bleed-through. • Controlled unwind. • Tape may become very difficult to remove if subjected to prolonged outdoor exposure. Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Typical Physical Properties Attribute Name Test Method Value Adhesive Type Rubber Backing Natural colored crepe paper Total Tape Thickness ASTM D3652 0.13 mm (5.2 mil) Typical Performance Characteristics Attribute Name Test Method Temperature Value 180° Peel Adhesion ASTM D3330 23 °C (73 °F) 3.1 N/cm (28 oz/in) ¹ Elongation at Break ASTM D3759 8 % Tensile Strength ASTM D3759 40.3 N/cm (23 lb/in) Short Term Temperature Resistance 93 °C (200 °F) ² ¹ 304 mm/min (12 in/min) ² Short Term (minutes, hour) Storage and Shelf Life Store under normal conditions of 16° to 27°C (60° to 80°F) and 40 to 60% relative humidity in the original packaging, out of direct sunlight. For best performance, use this product within 18 months from date of manufacture. 3M™ Masking Tape 2307 | English-US 1/2 Available Sizes Attribute Name Value Standard Roll Length 55 m (60 yd) Information Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations, and the user must take any action required under any recall, field action or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com. ISO Statement This product was manufactured under a 3M quality system registered to ISO 9001 standards. 3M™ Industrial Adhesives and Tapes Division 3M Center, St. Paul, MN 55144-1000 3M.com/iatd 3M is a trademark of 3M Company. ©3M 2024 (9/24) 3M™ Masking Tape 2307 | English-US 2/2
_svg.png){kind=small}
