TITEBOND FAST SET POLYURETHANE CONSTRUCTION ADHESIVE
Titebond Fast Set Polyurethane Construction Adhesive is a one-component, advanced adhesive technology designed to build strength faster and stronger than other common construction adhesives. It bonds to most building materials and provides a smooth bead for effortless extrusion - even in near-freezing temperatures.
 
Features & Benefits:
Recommended For: Demanding interior/exterior construction, installation and repair projects.
Compatible Materials: Common building materials including wet, frozen and treated lumber, stone, concrete, metal, landscaping blocks, brick, masonry, drywall, plastic, foam and mirrors
Builds strength faster than common construction adhesives
Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
Ultimate strength and durability
No drool and less mess
Cold weather extrusion
Bonds virtually any material
Smooth, full bodied bead
Waterproof
All weather
Will not become brittle, crack or lose strength
Application Guidelines
Application Temperature:
32°F to 120°F
Service Temperature Range:
-20°F to 250°F
Prep:
Surfaces must be clean and free of any material that may prevent adequate adhesion.
 
Application:
Cut tip on slant for 1/4’’ to 3/8’’ bead. For subfloors, bead size is determined by subfloor material and width of joist. Cut tip straight across to produce between a 3/8” to 1/2” bead, to ensure full width of coverage (squeeze out) on joist. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 10-20 minutes based on environmental conditions. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has cured. Note: For subfloors, apply adhesive to joists for one sheet at a time. Apply enough adhesive to joists to allow for full coverage and sufficient squeeze out when panels are placed. Do not slide panels in place as this can scrape adhesive off of joists. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup:
Tools and adhesive may be cleaned with mineral spirits before adhesive dries. Follow solvent vendor's precautions. If dried, removal will require scraping or other mechanical means.
Limitations:
Not intended for continuous submersion. Not intended for polyethylene, polypropylene, silicone, PTFE or other non-stick plastics. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. This moisture cured adhesive may exhibit a reduction in working time when exposed to high heat and humidity. When using on non-porous substrates, mist with water to speed curing.
 
Physical Properties
Type: One-component, moisture-cured polyurethane
State: Medium-viscosity mastic
Color: Brown
Open Time: Approximately 10-20 minutes, depending on environmental conditions
Solids: 98%
Viscosity: 150,000 cps.
Calculated VOC: < 50 g/L
Flashpoint: > 200°F
Freeze / Thaw Stability: Will not freeze
Storage Life: 18 months from date of manufacture
Odor: Low
 
Size
1/8” Bead
1/4" Bead
3/8" Bead
1/2" Bead
10 Oz. Cartridge
129 ft.
30 ft.
14 ft.
8 ft.
28 Oz. Cartridge
355 ft.
86 ft.
39 ft.
21 ft.
 
 
Our Central office is in Coquitlam , British Coulombia , Canada
 
for more information you can visit this: Link
 
We placed in Vancouver , Canada and send it to you in any place that you are in our great country : Canada
 
We have a lot of visitors from Calgary , Toronto , Montreal , Quebec City , Vancouver, Victoria